Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Twin - Screw Extruders
Single - Screw Extruder
Chill Roll Lines With Single And Multi Layers
Hydraulic Presses
High Temperature Vacuum Furnaces
3D Optical And Contact Surface Profilers
QX line of capsules For WET- SEM Imaging
Mask Less laser Based Lithography Systems
Mono And Bi Component Melt Spinners
System And Components For Microlithography
Multi Probe Station
Lab. Scale Melt Spinner
Surface Analytical Instruments And Devices like Manipulators, Translators, Plasma Probes, Kelvin Probes And EELS
Liquid Crystal Measurement Instruments
Hot and Cold Stages
Hot and Cold Chucks
Hot and Cold Plates
Temperature Controllers and Accessories
Liquid Crystal Cells & Cell Holders
Microfluidic Flow Control System
Flow-Rate Platform
Flow-Rate Control Module
 
  Address : 25, Kshama, SBI Colony, S.V. Road, Naupada, Thane. 400602, Mumbai, Maharashtra, India
  Tel.No.: +91 22 2544 4055
  Fax : +91 22 2544 4055
 
 
 
 
 
 
Parees Tech is founded by Engineers and technocrats with over 50 years of combined experience in the field of NanoTechnolgy, Electron Microscopy, Material/Polymer Testing..etc.
 
 
 
Material Testing Division
 
Single And Twin Screw Extruders, Compression Moulds, Two Roll Mills,
Single And Twin Screw Extruders, Compression Moulds, Two Roll Mills, etc... (For Educational, Research and Development establishments, Govt. Sector only)
Modular co-rotating twin-screw extruders available with clamshell barrels and our unique high tool steel barrel inserts. With screw diameters of 16, 20 and 26 mm and L/D ratios up to 44. Suitable for laboratory, research and small batch productions.
 
High Temperature Vacuum Furnaces
High Temperature Vacuum Furnaces
These furnaces are employed under vacuum / high vacuum, protective gases such as nitrogen / argon, but also with reaction gases like hydrogen and carbon monoxide. Furnaces For Special applications like Debinding, Sintering, Crystal growth, etc.
 
 
Nano Technology Division
 
3D Optical And Contact Surface Profilers
Contact and Optical Profilometer - on one platform. Automatic sample movement and one click measurement, makes NanoMap-D a step forward in imaging world.
 
Mask Less laser Based Lithography Systems
Mask Less laser Based Lithography Systems
This very high-end equipment is made to your own specifications, it offers a capacity of pattern photoloithography with UV beam sizes and several UV laser sources (up to 3 different ones) selected from the range 0.5µm/100µm, with a large aspect ratio on an as yet undefined work surface (400mm x 400mm, 12 inches in diameter ...
 
Mask Less laser Based Lithography Systems
Liquid Crystal Measurement Instruments
ALCT - the Automatic Liquid Crystal Tester has up to two independent channel, high voltage, arbitrary waveform function generators (±100V and 1MHz) and up to four real-time digital scope channels. The ALCT can perform automatic measurement of various liquid crystal parameters. VHR - the Voltage Holding Ratio Measurement System, RDC - the Residual DC Measurement System and Photo Detector are available too. Custom configurations for special measurements are also available. ...
 
Hot and Cold Stages
Hot and Cold Stages
Instec's microscope thermal stages are designed specifically with liquid crystal applications in mind. Our heating and cooling stages offer many features which are unique in the market place, such as dual heating with variable sample chamber height, large viewing aperture, and easy electrical access to the sample. ...
 
Hot and Cold Chucks
Hot and Cold Chucks
Standard sizes of Instec thermal chucks range from 20mm to 300mm (custom sizes are available up to 600mm). Temperature ranges for standard models are available from -190ºC to 600ºC, with higher temperature limits available for custom hot chucks. Instec hot and cold chucks provide ultra temperature uniformity and stability (better than ±0.1ºC). An optional triaxial heater is available for eliminating electrical noise. The hot chuck surface is available as a grounded or floating surface. ...
 
Hot and Cold Plates
Hot and Cold Plates
Standard sizes of Instec thermal plates range from 20mm to 300mm (custom sizes are available upon request). Temperature ranges for standard models are from -190°C to 600°C, with higher temperature limits available. Instec hot and cold plates provide ultra temperature uniformity and stability. Instec also offers gas tight covers for defrosting or gas purging. ...
 
Temperature Controllers and Accessories
Temperature Controllers and Accessories
Programmable Precision Temperature Controller; Liquid Nitrogen Cooling Accessories; Circulation Water Cooling Accessories. ...
 
Liquid Crystal Cells & Cell Holders
Liquid Crystal Cells & Cell Holders
Various types of empty LC cells are offered by Instec for easy LC testing.
  • Homogeneously aligned parallel, anti-parallel, and 90° twist cells
  • In Plane Switching (IPS) cells aligned both parallel and perpendicular to the electric field
  • Homeotropic (also known as vertically aligned) cells
  • ITO patterned cells with no alignment layer at all
  • Cells without PI for blue phase liquid crystals
 
Microfluidic flow control system
Microfluidic flow control system
  • The MFCS™-EZ is a unique pressure-based flow controller for micro-fluidic and nano-fluidic applications.
  • Easy to install and use
  • Easy to automate
  • Fast and stable
  • Field proven technology
 
Flow-Rate Platform
Flow-Rate Platform
Fluigent Flow-Rate Platform is a unique tool to easily measure all the flow-rates in your fluidic system with the best precision
  • Compatible with any flow controller
  • Easy to set up and use
  • High precision
  • Tunable to your liquids
 
Microfluidic flow control system
Flow-Rate Control Module
  • Both flow-rate and pressure control (on different channels)
  • Parallelize experiments
  • Short settling time
  • Excellent flow stability
  • Predict and automatically adjust pressure
  • Control both pressure and flow-rate at the same time
 
Analytical Division
 
Multi Probes Station
Multi Probes Station
Probe Station(PE–2), Probe Station(PE–4), Mine Probe Statio (PE–4X), Mini-Probe Station, Mini-Probe Station(KPE-4), Mini-Probe Station (LC Series), Probe Station(EBSeries), Probe Station (BD-EX Series), Probe Station(BD Series)
 
System And Components For Microlithography
System And Components For Microlithography
Jerry Bachur companies have been a leading suppliers of cost-effective, hi gh performance UV Lightsources and UV Exposure Systems.
 
 

Specialised Systems - We represent Wasson-ECE who offer Standard and Custom built turn-key systems for the number of applications, refer to http://www.wasson-ece.com/applications.html

For complete details on Wasson ECE refer to http://www.wasson-ece.com/ 

Other Products: Complete Range of Optical Microscopes, Cameras , Image Analysis Software from Dewinter Technologies, for details refer to www.dewinterindia.com

 
Home - About Us - Products - Enquiry - Contact Us - Sitemap Designed & Hosted by : MID  Promoted by : GID